Spiegelplatte
von gunnie- SNIPPET_TEXT:
-
- # smartctl -a -q noserial /dev/sdb
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.38-2-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Momentus 7200.4
- Device Model: ST9320423AS
- Firmware Version: 0003LVM1
- User Capacity: 320.072.933.376 bytes [320 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Fri Mar 16 15:42:14 2012 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 74) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103b) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 118 099 034 Pre-fail Always - 193371621
- 3 Spin_Up_Time 0x0003 100 098 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 7379
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 4350198084
- 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 230429290400212
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1538
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 21475164167
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 074 053 045 Old_age Always - 26 (Min/Max 20/26)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 40
- 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 7617
- 193 Load_Cycle_Count 0x0032 050 050 000 Old_age Always - 101208
- 194 Temperature_Celsius 0x0022 026 047 000 Old_age Always - 26 (0 6 0 0)
- 195 Hardware_ECC_Recovered 0x001a 053 045 000 Old_age Always - 193371621
- 196 Reallocated_Event_Count 0x000f 098 098 030 Pre-fail Always - 1806 (50388, 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 107
- 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 1279 -
- # 2 Short offline Completed without error 00% 627 -
- # 3 Short offline Completed without error 00% 100 -
- # 4 Extended offline Completed without error 00% 66 -
- # 5 Short offline Completed without error 00% 56 -
- # 6 Extended offline Aborted by host 80% 56 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Quellcode
Hier kannst du den Code kopieren und ihn in deinen bevorzugten Editor einfügen. PASTEBIN_DOWNLOAD_SNIPPET_EXPLAIN